Fairbanks FB3000 Highway System Application - Manual (Page 76)

Section 5: Highway Enforcement Mode
7/08 76 51188 Rev. 1
5.3.3. Multiaxle Weighment
The Instrument displays “00” in the Idle/Inactivity Screen, and the traffic light is
GREEN .
1. Press the ZERO button on the Weigh Screen Keypad, if needed.
2. Drive the vehicle onto the scale.
─ The Initial Weight Value is exceeded.
─ The instrument then displays the Weigh
Screen
3. Wait for Section One (1) of the scale to
reach the Final Weight Value.
─ The traffic light turns RED .
─ The Instrument Type Section Screen
appears.
4. Press .
5. When Multiaxle is selected, the Axle
Selection Screen
displays.
6. Press one of the four buttons:
─ Weigh Double
─ Reweigh Double
─ Weigh Triple
─ Reweigh Triple
Select the correct Weighment Type button.