Fairbanks FB3000 Highway System Application - Manual (Page 38)

Section 3: Highway System Mode of Operation
7/08 38 51188 Rev. 1
Definition
3.5.19. Tare Options / Editor
Programs the default Tare settings.
3.5.19.1. Steps to setting the
Tare Options
1. Select either Yes or No for Tare
Enable .
─ This controls whether a Tare
Wt
is prompted for doing data
entry.
2. Select either Yes or No for
Manual ID.
─ This controls whether the
Manual Tare ID Character “
* ” is
printed with the tare weight for
a Keyboard entered tare.
3. Enter either 0 , or a specific
number to the Tare’s Expiration
Days.
─ This sets the number of days
that a Stored Tare Weight may
be used.
─ After exceeding this number of
days, the operator is prompted
to continue to use the Tare Wt.
or not.
─ A value of “0” disables this
option.
4. Press the Tare File Editor button to create a new Tare setting or to view
existing Shared Tare Weights (see Section 3.5.24. )
5. Press the Auto Tare button to select the standard preset Tare amount.
─ This captures the weight on the scale to be stored in the tare file.
─ The weight is displayed and the operator is prompted to enter the Tare ID.