Fairbanks FB3000 Highway System Application - Manual (Page 36)

Section 3: Highway System Mode of Operation
7/08 36 51188 Rev. 1
Definition
3.5.16. Video Camera Input
Formats the settings for an Ethernet Video Camera, when one is installed.
─ Sets up to two (2) camera types and establishes their Network Addresses.
─ Formats parameters for the camera(s).
• Only cameras supplied by Fairbanks Scales are supported with this option.
3.5.16.1. Video Camera(s) with a Standalone FB3000
A Switch (p/n 26220 ) is necessary when installing the Video Camera(s) to a
Standalone FB3000 Indicator. This establishes a Peer-to-Peer Network, which
is required
for the two to function together.
• It is not possible to connect the two directly together using only an Ethernet
connection. A Switch directs and translates the message, and is required.
• The Camera has only a Ethernet Port . Because of this, using either a laptop
computer
or a USB CD Drive for the Installation Software is necessary.
• The Camera Installation Software allows a Static IP Address to be
programmed into the Video Camera.
• This address is 192.168.1.1.
NOTE: The printer must be able to print images to activate “Print on Ticket”
feature.