Fairbanks FB3000 Highway System Application - Manual (Page 74)

Section 5: Highway Enforcement Mode
7/08 74 51188 Rev. 1
5.3. OPERATION STEPS
5.3.1. Basic Weigh Function
The Instrument displays “00” in the
Idle/Inactivity Screen, and the traffic light is
GREEN .
1. Press the ZERO button on the Weigh
Screen Keypad, if needed.
2. Drive the vehicle onto the scale.
─ The Initial Weight Value is
exceeded.
3. Wait for Section One (1) of the scale to
reach the Final Weight Value.
─ The traffic light turns RED .
─ The Instrument Type Section Screen
appears.
4. Select either Weigh, Reweigh or
Multiaxle .
5. Enter the necessary information, such as
the Truck/Loop ID .
─ Other input fields may appear,
depending on the page format.
─ See Section 3.5.11. for formatting
the necessary input fields.
When traffic light turns RED , select Weigh,
Reweigh , or Multi-axle .