Fairbanks FB3000 Highway System Application - Manual (Page 37)

Section 3: Highway System Mode of Operation
7/08 37 51188 Rev. 1
Definition Window
3.5.17. Network Terminal Setup
Sets up the application for Multiple Terminal
Operation.
─ Terminal Count defines the total number of
terminals in the System.
─ This Terminal ID Defines the local terminal’s
Terminal Number .
─ Defines the storage locations for all the non-local
terminal’s database files (not
This Terminal
ID ).
ƒ The Browse button helps with this
entry.
─ Terminals that cannot be communicated with at
the selected storage locations are shown as
Off-line.
─ Terminals that can be communicated with at the
selected storage locations are shown as
On-line.
3.5.17.1 Network Terminal Setup Steps
1. Select the number of terminals the System is configured for ( Terminal Count ).
2. Select the terminal number for the local terminal ( This Terminal ID ).
3. For all terminals except the local terminal ( This Terminal ), enter the storage
location for each terminal’s database files.
4. A Browse button helps with this entry.
5. Press .
Definition Window
3.5.18. Passwords
The Highway System has two passwords .
• Configuration Password secures the functions of
the Configuration Menu.
9 Password = No characters (blank)
─ The security is reset after exiting to the weight
processing screen.
NOTE: All passwords are case sensitive.