Fairbanks FB3000 Highway System Application - Manual (Page 16)

Section 2: Service Policy Information
7/08 16 51188 Rev. 1
2.2.4. Users’ Responsibility
9 All electronic and mechanical calibrations and/or adjustments required for making
the equipment perform to accuracy and operational specifications are considered
to be part of the installation.
─ This is included in the installation charge.
─ Only those charges which are incurred as a result of the equipment's
inability to be adjusted or calibrated to performance specifications may be
charged to warranty.
9 Absolutely no physical, electrical or program modifications other than selection of
standard options and accessories are to be made to this equipment.
9 The equipment consists of printed circuit assemblies which must be handled
using ESD handling procedures, and must be replaced as units.
─ Replacement of individual components is not allowed.
─ The assemblies must be properly packaged in ESD protective material and
returned intact for replacement credit per normal procedures.