Gentec-EO QE and XLE4 - Manual (Page 12)

QE Series Joulemeter Instruction Manual Version 3.0 April 2014 12
Footnotes
Model
QE65LP-S-MB
QE65LP-H-MB
QE65ELP-S-MB
QE65ELP-H-MB
Optical Absorber MB
Spectral Range 1, 8 0.19 – 20 µm
Calibrated Spectral Range
(Optional)
(QE-QED Series)
1, 8
0.248 – 2.5 µm
10.6 µm
0.3 – 2.1 µm
Typical Sensitivity 2, 7 4 V/J 1.5 V/J
Calibration Uncertainty 7, 2, 8, 9, 11 ± 3%
Repeatability < 0.5 %
Max. Pulse Energy 1.064 µm
0.266 µm
With QED @ 1.064 µm
QED @ 0.266 µm
3, 12
25 J
20 J
125 J
35 J
50 J
(µs pulse, single shot)
200 J
(µs pulse, single shot)
Noise Equivalent Energy (NEE)
(Typ)
2, 11 10 µJ 20 µJ
Max. Repetition
Rate
2, 5, 11 100 Hz 20 Hz
Typical Rise Time
(0-100%)
2, 11 1000 µsec 6000 µsec
Max. Pulse Width (Typ) 2, 6, 10, 11 700 µsec 5000 µsec
Max. Energy Density
12
1200 mJ/cm
2
@ 1064nm, 150µs, 10 Hz
600 mJ/cm
2
@ 1064nm, 7ns, 10 Hz
500 mJ/cm
2
@ 266nm, 7ns, 10 Hz
Max. Energy Density with QED
14 J/cm
2
@1064nm, 150µs, 10Hz
16 J/cm
2
@1064nm, 7ns, Single shot
8 J/cm
2
@1064nm, 7ns, 10Hz
6 J/cm
2
@532nm, 7ns, 10Hz
1 J/cm
2
@266nm, 7ns, 10Hz
Max. Average Power
Detector Alone (QE65xP-S-MB):
With optional Heatsink (QE65xP-H-MB):
12, 13
12 W (30 W with QED)
40 W (90 W with QED)
Max. Power Density
Detector Alone (QE65xP-S-MB):
With optional Heatsink (QE65xP-H-MB):
With QED :
10 W/cm² @ 12 W
5 W/cm² @ 40 W
600 W/cm²
Dimensions (H x W x D)
Detector Alone (QE65xP-S-MB):
With optional Heatsink (QE65xP-H-MB):
90 x 90 x 20 mm
90 x 90 x 94 mm
Weight
Detector Alone (QE65xP-S-MB):
With optional Heatsink (QE65xP-H-MB):
440 g
900 g
Aperture Size
QE 65:
QED 65:
65 x 65 mm
62 x 62 mm
Aperture Area Size
QE 65:
QED 65:
42 cm
2
38 cm
2