Gentec-EO QE and XLE4 - Manual (Page 36)

QE Series Joulemeter Instruction Manual Version 3.0 April 2014 36
6 APPENDIX B
6.1 Recycling and separation procedure for WEEE directive 2002/96/EC.
This section is used by the recycling center when the detector reaches its end of
life. Breaking the calibration seal or opening the monitor will void the detector
warranty.
The complete detector contains
1 Detector with wires or DB-15.
1 instruction manual
1 calibration certificate
1 Electronic PCB (Integra option)
1 Plastic enclosure (Integra option)
6.2 Separation:
Paper: Manual and certificate
Wires: Cable Detector.
Printed circuit board: inside the Detector (-C0 version only) or DB-15, no need to
separate (less then 10 cm
2
). Inside the integra enclosure, no need to separate (less then
10 cm
2
).
Aluminum: Detector casing.
Plastic: Integra enclosure.