Gentec-EO QE and XLE4 - Manual (Page 3)

QE Series Joulemeter Instruction Manual Version 3.0 April 2014 3
TABLE OF CONTENTS
WARRANTY .......................................................................................................2
TABLE OF CONTENTS ......................................................................................3
LIST OF ILLUSTRATIONS .................................................................................4
1 GENERAL INFORMATION 5
1.1 . INTRODUCTION 5
1.2 . QE SERIES “SMART INTERFACE” CONNECTOR 6
1.3 . QE4, QE12, QE25, QE50, QE65 AND QE-B SERIES
SPECIFICATIONS 8
1.3.1 .. Specifications for the QE12, QE 25, QE50, QE65 and QE
95 MB 9
1.3.2 .. Specifications for QE4, QE12, QE 25 and QE 50 MT 15
1.3.3 .. Specifications for the QE8-B MT and BL 20
1.3.4 .. Specifications for QE4-BL 22
1.3.5 .. Specifications for XLE4 23
2 OPERATING INSTRUCTIONS 24
2.1 . When used with compatible monitor 24
2.1.1 .. General Instructions 24
2.1.2 .. Working at other wavelengths than 1.064µm (except with
QED attenuator / diffuser) 25
2.1.3 .. Working with QED attenuator / diffuser. 26
2.2 . When using an oscilloscope: 26
2.2.1 .. General Instructions 26
2.2.2 .. Working at other wavelengths than 1.064µm 27
3 DAMAGE TO THE OPTICAL ABSORBER MATERIALS 30
4 OPTIONAL ACCESSORIES 32
4.1 . QED ATTENUATOR / DIFFUSER 32
4.2 . Other Accessories: 33
5 APPENDIX A 34
5.1 . QED/12/25/50/65/95 34
6 APPENDIX B 36
6.1 . Recycling and separation procedure for WEEE directive 2002/96/EC. 36
6.2 . Separation: 36
7 DECLARATION OF CONFORMITY 37