Ransburg REA Automatic Applicators 77359, 76110, 77140 - Manual (Page 59)

65 Spring Washer 76927-00
66 Needle Seal 76920-00
67 Valve Body 76918-00
68 O-Ring, .426” ID x .070” CS, Solvent Proof SSG-8136
69 Needle Seat 75960-00
70 Valve Needle 76921-00
71 SS Male Connector, 3/8” Tube x 1/4” NPT 41-FTC-1002
72 Tubing, 3/8” OD x 1/4” ID (6ft. Required), FEP SSP-5020
Label, Grounded Fluid Supply (2 Required) 77557-00
73 Fitting, 1/4” AN x 3/8” T LSFI0022-06
74 Screw for use with:
Assembly Without Dump Valve (2 Required) LSFA0004-40C
Assembly With Dump Manifold (4 Required) LSFA0004-64C
75 Fitting, 1/4” AN x 3/8” T LSFI0022-06
76 Manifold Assembly Without Dump Valve 77550-01
Manifold Assembly with Dump Manifold 77550-02
Manifold Assembly with Dump Manifold 77550-03
77 Rear Bulkhead Plate 77553-00
78 Fitting, 1/4” AN x 1/4” T LSFI0022-04
79 Screw, 3/8-16 x .75” LG LSFA0021-24C
80 Tubing, 3/8” OD x 1/4” ID (7.25” Required) H-2338
81 Tube Fitting, 1/4” NPT x 3/8” OD (2 Required) LSFI0025-21
82 Tubing, 3/16” OD x .025” Wall (10.5” Required) SSP-5014
83 Tube Fitting, 1/8” NPT x 3/16” OD LSF10025-09
84 Tube Fitting, 1/4” NPT x 1/2” OD (2 Required) LSFI0025-26
85 Tube Fitting, 1/8” NPT x 1/4” OD (2 Required) LSFI0025-12
86 Applicator Bar Bracket (Upper) 77161-02
87 Screw, 5/16-18 x 1.50” LG (5 Required) LSFA0028-01
88 Applicator Bar Bracket (Lower) LREA0018-00
Dielectric Grease (1 oz.) LSCH0009-00
Dielectric Grease (4 oz.) 59972-00
Special Multi-Purpose Wrench 19749-00
Spanner Wrench 20049-00
Nut Tool 77558-00
REA 900A SOLVENTBORNE - PARTS LIST (Model No. 77359)
(Cont.) (Figure 15)
Item # Description Part #
Ransburg
REA Automatic Applicators - Parts Identification
55 AA-99-02.5