ALESIS MIXING CONSOLES - Manual (Page 17)

SECTION 2
12
MIX/5
When in the EDIT mode, pressing the MIX button will adjust the relative
level of either the Delay or Reverb, depending on which page the Edit
LED is set. The Chorus level is always the same and is either On or Off
depending upon the Configuration selected.
After pressing the
MIX button, pressing the VALUE buttons will select the
desired levels.
When in the PROGRAM mode, this is button 5 of the keypad for
selecting a program by directly entering the desired program number.
CONFIG/6
When in the EDIT mode, the CONFIG button selects the various signal
flow possibilities of MIDIVERB III's four Effects. After pressing the
CONFIG button, pressing the VALUE buttons will select the available
choices.
When in the PROGRAM mode, this is button 6 of the keypad for
selecting a program by directly entering the desired program number.
MOD/7
When in the EDIT mode, the MOD button lets you control various
MIDIVERB III parameters isuch as Reverb Decay Time or Reverb Level
in real time from a MIDI controller like the pitchwheel, mod wheel,
keyboard aftertouch, keyboard note value, keyboard velocity, sustain
pedal, breath controller, or volume control on a synthesizer or other MIDI
device. After pressing the
MOD button, pressing the VALUE buttons
selects the available choices.
When in the PROGRAM mode, this is button 7 of the keypad for
selecting a program by directly entering the desired program number.
MIDI/8