Setup – ALESIS MIXING CONSOLES User Manual

Page 25

Advertising
background image

SECTION 3

20

CONNECTION TO THE MAIN OUTPUTS

Still another way of interfacing the MIDIVERB III to a mixer or recording
console would be in-line across the output of your mixing console (See
Figure 4
).
This setup would be used only if you needed to effect the entire mix.

FIGURE 4

STEREO CONNECTION TO THE CONSOLE MAIN OUTPUTS

MAIN OUT
LEFT

MAIN OUT
RIGHT

LEFT INPUT

RIGHT INPUT

LEFT OUTPUT

RIGHT OUTPUT

TO MIXDOWN DECK
OR SOUND SYSTEM

SETUP

After you have connected your MIDIVERB III to either an instrument or
mixing console:

1) Turn the

INPUT LEVEL

control up until the green

SIGNAL

LED

Indicator lights (It's OK if the red Clip LED occasionally lights,
but distortion will result if it remains on constantly).

Advertising