Figure 8 midi controller sources, Figure 9 midiverb iii midi parameter targets – ALESIS MIXING CONSOLES User Manual
Page 37
SECTION 4
32
FIGURE 8
MIDI CONTROLLER SOURCES
CONTROLLER DESCRIPTION
PITCH BEND
The pitch bend wheel or lever common on most synthesizers.
CONTROLLER #1
The Mod Wheel common on most synthesizers is designated
Controller #1 in the MIDI specification. It is called Controller #1
instead of Mod Wheel here since it is easier to display as "1" due to
the limits of the 7 segment LED displays.
AFTER TOUCH
After a note is depressed, a pressure on the key will cause a MIDI
command. This ability is not available on all keyboards.
NOTE NUMBER
Any MIDI note from keyboard, sequencer, or drum machine.
NOTE VELOCITY
The target parameter will change in relation to how hard a key is
struck.
SUSTAIN PEDAL
The common sustain pedal
found on most electronic keyboards can be used as a modulation
controller.
BREATH CONTROLLER
The breath controller found on some electronic keyboards can be
used as a modulation controller.
VOLUME PEDAL
The common volume pedal
found on some electronic keyboards can be used as a modulation
controller
(MIDI Controller #7).
MOD PARAMETER DESTINATIONS
There are 6 parameters of the MIDIVERB III that can be modulated by
one of the above source controllers. These are called "targets" or
"destinations". They are:
FIGURE 9
MIDIVERB III MIDI PARAMETER TARGETS
PARAMETER
DESCRIPTION
Reverb Decay
Length of time before the Reverb dies can be modulated.
Delay Time
Length of time between repeats can be modulated
Delay Regeneration
Number of echo repeats can be modulated
Chorus Speed
How fast or slow the Chorus or Flange oscillates can be modulated
Reverb Level
The output of the Reverb can be remotely modulated
Delay Level
The output of the Delay can be remotely modulated
MOD ROUTING DISPLAY
The MIDIVERB III displays exactly which Mod Routing is currently selected via
the LED display. Of the three characters that will be displayed, the first
character on the left will always indicate which MIDI Controller source has been
selected. The second and third characters displays the MIDIVERB III
parameter selected.