ALESIS MIXING CONSOLES - Manual (Page 28)

USING MIDIVERB III
23
023
Note that the front panel still displays the following:
—
The PROGRAM LED will be lit, indicating that the MIDIVERB III is in the
Program mode.
—
The display will read the program number, only now it reads "023".
WITH KEYPAD
Another way to select program 23 would be to use the ten function keys
on the right of the front panel which double as a keypad in the Program
mode (notice the numbers beside each button). To do this we would do
the following:
1) Select the three digits (all programs must have 3 digits) from
the keypad. In this case 0 ( INT. PROG button), 2 ( DELAY
button), 3 ( CHORUS button).
The program will be selected after the third digit is entered.
2) The three digits must be selected within 4 seconds or the
program will revert back to the previous program number.
023
After the third digit is entered, the display will read as above.
FROM MIDI
The third and final way to select program 23 is with a program change
command received via MIDI.
1) Enable MIDI Program Change by first pressing the EDIT button.
2) Press the MIDI button until the display reads "Pof" or "Pon".