ALESIS MIXING CONSOLES - Manual (Page 29)

SECTION 4
24
Pon
3) Press the "Up" VALUE button until display read "Pon"
4) Set program 023 on the MIDIVERB III to correspond with the
desired program number on your synth, sequencer, or other
MIDI device. (see " How to Use MIDI Mapping" on page
xxxxxxx).
5) Send the program change from your synth, sequencer, or
other MIDI device.
EDITING A PROGRAM
Any MIDIVERB III program can be easily edited (modified) by entering
the EDIT mode. As an example, we will edit our program 023.
1) Select the EDIT button. The lower of the the two LEDs
adjacent to the EDIT button will light, the PROGRAM LED will
turn off, and the LED for the function or parameter last
selected will light.
This indicates that the bottom row of functions of the top row of
buttons can be accessed, so now the
REVERB , DELAY ,
CHORUS , EQ , and MIX buttons will control REVERB DECAY,
DELAY REGENERATION, CHORUS SPEED, EFFECT EQ,
and DELAY MIX. (The illustration indicates a Reverb Decay
time of 50).
50
2) Pressing the EDIT button again will select the upper LED which
indicates that the top row of edit functions on the top row of
buttons can be accessed.
Now the
REVERB , DELAY , CHORUS , EQ , and MIX buttons control
REVERB ALGORITHM, DELAY TIME, CHORUS
ALGORITHM, INPUT EQ, and REVERB MIX. (The illustration
indicates that a Reverb Algorithm of "ro1" or Room 1 has been
chosen).