Gilderfluke&Co DMX-512, Serial, and MIDI Output Smart Bricks - Manual (Page 17)

BS-DMX-Tx
For a BS-DMX-Tx, the menu will appear as follows. There are no serial commands available on the BS-
DMX-Tx. The menu just allows you to see what sized Eprom (if any) is installed. If no Eprom is found, the Ônot
foundÕ will appear in the place of the Eprom size.
-Gilderfluke & Company - DMX Output Smart Brick - ver 1.00 - copyright 1999 DCM-
EPROM: 18h channels @ 30 FPS / first show is 005Ah frames long
Enter Command-
DMX-512 data is always transmitted from the BS-DMX-Tx starting at DMX address zero. When you save
the file to be programmed into the Eprom, be aware that no matter what ÔstartÕ address is used, the first
channel will come out of the BS-DMX-Tx at address zero.
G ILDERFLUKE & C O .¥ 205 S. F LOWER S T . ¥ B URBANK , CA 91502 ¥ 818/840-9484 ¥ 800/776-5972 ¥ FAX 818/840-9485
17 of 48