Gilderfluke&Co DMX-512, Serial, and MIDI Output Smart Bricks - Manual (Page 35)

-Gilderfluke & Company - Serial Output Smart Brick - v1.05 - copyright 1999 DCM-
EPROM: 123 channels @ 30 FPS / first show is 12345 frames long
input 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18
0) 0 ^ |_10|_13|_30|_82|105|115|105|110|103|___|___|___|___|___|___|___|___|___|
1) 1 ^ |_10|_13|_31|_82|105|115|105|110|103|___|___|___|___|___|___|___|___|___|
2) 2 ^ |_10|_13|_32|_82|105|115|105|110|103|___|___|___|___|___|___|___|___|___|
3) 3 ^ |_10|_13|_33|_82|105|115|105|110|103|___|___|___|___|___|___|___|___|___|
4) 4 ^ |_10|_13|_34|_82|105|115|105|110|103|___|___|___|___|___|___|___|___|___|
5) 5 ^ |_10|_13|_35|_82|105|115|105|110|103|___|___|___|___|___|___|___|___|___|
6) 6 ^ |_10|_13|_36|_82|105|115|105|110|103|___|___|___|___|___|___|___|___|___|
7) 7 ^ |_10|_13|_37|_82|105|115|105|110|103|___|___|___|___|___|___|___|___|___|
8) 0 v |_10|_13|_30|_70|_97|108|108|105|110|103|___|___|___|___|___|___|___|___|
9) 1 v |_10|_13|_31|_70|_97|108|108|105|110|103|___|___|___|___|___|___|___|___|
A) 2 v |_10|_13|_32|_70|_97|108|108|105|110|103|___|___|___|___|___|___|___|___|
B) 3 v |_10|_13|_33|_70|_97|108|108|105|110|103|___|___|___|___|___|___|___|___|
C) 4 v |_10|_13|_34|_70|_97|108|108|105|110|103|___|___|___|___|___|___|___|___|
D) 5 v |_10|_13|_35|_70|_97|108|108|105|110|103|___|___|___|___|___|___|___|___|
E) 6 v |_10|_13|_36|_70|_97|108|108|105|110|103|___|___|___|___|___|___|___|___|
F) 7 v |_10|_13|_37|_70|_97|108|108|105|110|103|___|___|___|___|___|___|___|___|
enter number of string to edit, or <ESC>ape to return to main menu (0-F)-
In the example above, the strings have been set to send out strings that display the bit
number and the word ÔRisingÕ or ÔFallingÕ.
u) Download configuration: This command is used to save the current configuration of the BS-
Serial Smart Brick through the serial port to a file on your computer. This file can then be
reloaded into this, or any other BS-Serial Smart Brick. To use this command, you first invoke it,
then following the instructions, you set your computer to receive a string of ASCII characters.
You then press any key to tell the BS-Serial Smart Brick to send out it's configuration. When it
has finished, you then tell your computer to stop saving characters, and then hit any key to
tell the BS-Serial Smart Brick to redraw the screen.
o) Reload Default Configuration: This command reloads the default configuration to the BS-
Serial Smart Brick. This will overwrite any configuration data which was in the BS-Serial.
s) Upload configuration: This command (which doesn't appear on the menu) is the compliment
of the Download Configuration command. To invoke it, all you need to do is tell your modem
program to send the file saved by the 'download' command back to the BS-Serial Smart Brick.
This will automatically invoke the upload command and store the incoming data.
+) Data Dump: This command (which doesn't appear on the menu) dumps out the DMX output
buffer and the configuration memory onto the screen. This started as some developmental
routines, and there was plenty of space available, so what the hell.
G ILDERFLUKE & C O .¥ 205 S. F LOWER S T . ¥ B URBANK , CA 91502 ¥ 818/840-9484 ¥ 800/776-5972 ¥ FAX 818/840-9485
35 of 48