Gilderfluke&Co PA System - Manual (Page 6)

Local PA Outputs (8)
Local PA Outputs (8)
UP TO 256
PA STATIONS
EXT. INPUTS
UP TO 256
DIGITAL
REPEATER/
MIXER CARDS
Digital
Repeater/
Mixer Card
AMP
Digital
Repeater/
Mixer Card
AMP
Digital
Repeater/
Mixer Card
AMP
Digital
Repeater/
Mixer Card
AMP
Digital
Repeater/
Mixer Card
AMP
Digital
Repeater/
Mixer Card
AMP
Digital
Repeater/
Mixer Card
AMP
Digital
Repeater/
Mixer Card
AMP
Digital
Repeater/
Mixer Card
AMP
EXT. INPUTS
EXT. INPUTS
EXT. INPUTS
EXT. INPUTS
EXT. INPUTS
EXT. INPUTS
EXT. INPUTS
EXT. INPUTS
Serial Port
Printer Port
Analog Output BGM input (1 or 8)
MA-100
PA Master
BGM input (1 or 8)
up to 31
MA-200
PA Interface Cards
Any mix of up to 256 PA Stations can be attached to the PA System at the same time. The PA stations
are available in four different styles:
1) PA-100 One Button PA Stations: These use the microphoneÕs Push To Talk (PTT) button to se-
lect any one PA zone. All mounting, wiring, and microphone details are identical to those for
the Four Button PA Stations.
2) PA--400 Four Button PA Stations can select any of four different PA zones, plus one more with
the microphoneÕs PTT button. Their buttons can be configured as push-to-talk buttons or to
latch the last requested zone (the PA channel wonÕt be opened until the microphone PTT
button is depressed). When operating in this latter mode, you can tell the stationÕs micro-
phone PTT button to revert to the PA zone it normally accesses when it is released.
Both PA-100 and PA-400 PA Stations mount in standard deep duplex boxes. All power and
signals are attached to them through a standard RJ-45 (8 pin modular) style connector.
A low impedance noise canceling microphone like the University Sound US602FL is typi-
cally used with PA-100 and PA-400 stations. A four pin male ÔXLRÕ is used to attach the micro-
G ILDERFLUKE & C O . ¥ 205 S OUTH F LOWER S T . ¥ B URBANK , C ALIF . 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485
2 of 35