IAI America IX-NSN6016H - Manual (Page 115)

107
1
1. Precautions for Use
11.7 Suction Rate of Clean Room Specification IX-NNC50
††H/ 60††H/
70
††H/ 80††H
Cleanness class 10 can be achieved by suctioning air at the specified rate through the quick joints for suction
provided on the base and rear panel.
x The suction device and suction air tubes (‡12) are provided by the customer.
Model number Suction rate (Nl/min)
IX-NNC50 ††H/60††H 60
IX-NNC70 ††H/80††H 80
x The clean room must have a down-flow environment.
x Cleanness class 10 is based on the particle size of 0.1Pm.
x Dust will be raised if no suction is provided.
Applicable tube: outer diameter
‡12 (inner diameter ‡8)
Quick joint for suction
Warning