IAI America IX-NSN6016H - Manual (Page 85)

77
8. Installation Environment and Storage Environment
8. Installation Environment and Storage Environment
8.1 Installation Environment
Install the robot in an environment that satisfies the following conditions:
8.1.1 IX-NNN50
H/60 H/70 H/80 H,
IX-NNC50
H/60 H/70 H/80 H,
IX-NSN5016H/6016H
x Away from direct sunlight
x Not subject to radiated heat from a high-capacity energy source such as a heat-treating furnace
x Surrounding air temperature: 0qC to 40qC
x Humidity: 85% or less (non-condensing)
x Not exposed to corrosive or flammable gases
x Not subject to impact or vibration
x Not exposed to a significant amount of electromagnetic waves, ultraviolet rays or radiation
x Sufficient space is available to ensure safety in teaching and maintenance/inspection operations
Generally, the robot must be installed where the operator need not wear protective gear in order to work.
8.1.2 IX-NNW50
H/60 H/70 H/80 H,
The dust-proof/splash-proof specification has the dust-proof/splash-proof structure equivalent to IEC standard
and protection class IP65 against water and powder dust.
Install the robot in an environment that satisfies the following conditions:
Note that the dust-proof/splash-proof specification is not explosion proof.
x Away from direct sunlight
x Not subject to radiated heat from a high-capacity energy source such as a heat-treating furnace
x Surrounding air temperature: 0qC to 40qC
x Humidity: 85% or less (non-condensing)
x Not exposed to corrosive or flammable gases
x Not subject to impact or vibration
x Not exposed to a significant amount of electromagnetic waves, ultraviolet rays or radiation
x Sufficient space is available to ensure safety in teaching and maintenance/inspection operations