Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 20)

WaveAce 1000/2000
14 922131-00 Rev A
Vertical Controls

Volts/Div knobs (CH1-4, pictured) - Turn to adjust the volts/division
setting (vertical gain) of the corresponding channel (CH1-4). Press the
knob to toggle between fine (variable) and coarse (fixed) adjustments.
See Vertical Settings and Channel Controls (on page 23) for more
information.

Channel buttons (CH1-4) - Press a channel button (CH1-4) to turn that
channel ON or OFF and open the Channel menu for that channel. You
can use the Channel menu to set up a channel. When the channel is ON,
the channel button is lit.

Vertical Position knobs (CH1-4) - Turn to adjust the vertical position of
the corresponding channel (CH1-4). Press to set the vertical position to
zero.

REF - Press to display the Ref Wave menu. You can use this menu to
save and recall two reference waveforms (REFA and REFB) in internal
memory. See Creating Reference Waveforms (on page 53) for more
information.

MATH - Press to display the Math menu. The Math menu provides
numerous mathematical functions as explained in Waveform Math (on
page 49).