Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 89)

Operator’s Manual
922131-00 Rev A 83
2. Press the Source option button and select a source (CHS 1 - 2; or CHS 1 -
4 on 4 channel models).
3. Use the Operate option button to run and stop the Pass/Fail test.
4. Press the Msg Display option button to turn message display On/Off
during the Pass/Fail test.
Pass/Fail - Page 2/2
After pressing Next Page from Page 1/2, the second of two PASS/FAIL menus
(Page 2/2) is shown and contains the following option button controls.
1. Press the Output option button to either Pass or Fail.
2. Press the Stop On Output option button and turn it On/Off as desired.
3. Use the Mask Setting option button to show the Mask menu Page 1/2.
Mask - Page 1/2
Mask Page 1/2 contains the following option button controls.