Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 68)

WaveAce 1000/2000
62 922131-00 Rev A
5. Press the Save option button and the SAVE ALL screen opens showing
Directorys by default. Finish saving your .CSV file using the following
instructions in Using the SAVE ALL Screen (on page 66).

Switch to the SAVE ALL - Files Menu .

Name and Confirm your file using the steps explained in Creating
Folders and Files .
NOTE: The Recall option is excluded from Save/Recall menus when Picture or
CSV is selected as the Type. The Load option is disabled (grayed-out) on
menus inside the SAVE ALL screen when Pictures or CSV file types are selected
as Type.
Recalling Factory Settings
The oscilloscope is set up for normal operation when it is shipped from the
factory. Applying the default setup does not Language option, saved reference
waveform files, saved setup files, display contrast, calibration data.
There are two ways to reload the factory settings:
1. Press the DEFAULT SETUP front panel button.
OR
2. Press the Save/Recall front panel button. The SAVE/REC menu opens.
Press the Type option button and select Factory.
3. Now, press the Load option button.
The default settings made to the oscilloscope are detailed as follows:
Menu Option Default
CH1,CH2 Coupling DC