Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 65)

Operator’s Manual
922131-00 Rev A 59

Press the Recall option button and the selected Waveform is
recalled from internal memory. The oscilloscope briefly shows a
Read Data Success! message on the lower part of the grid display
area.
Recalling Waveforms from a USB Memory Device

Insert the USB memory device and press the Save To option
button to select File.

Press the Recall option button and the SAVE ALL screen is
shown. See Using the SAVE ALL Screen (on page 67) to continue
recalling from your USB memory device.
Saving and Printing Waveform Pictures
You can save a waveform image (.BMP) file to a USB memory device or print a
waveform image directly to a USB-connected printer from your WaveAce.
Once you have set up your print options as explained in Print Setup (on page
78) and connected the device to the USB port, you can press the Print front
panel button to either Save or Print the image.
Note: Most USB printers supporting direct printing through Type A USB port
connections are compatible with your WaveAce oscilloscope. Refer to your
printer's product documentation to verify compatibility.
1. Press the Save/Recall front panel button and the SAVE/REC menu is
shown.
2. Use the Type option button and select Picture.