Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 - Manual (Page 178)

Teledyne LeCroy Filtering
176 SierraNet M408 User Manual
Filtering LUNs and LBAs
Perform the following steps to filter for LUNs and LBAs:
1. Click the Filter icon to display the Quick Filter dialog.
2. Click Advanced to display the Hide/Show dialog.
3. Select FCP_CMD in the left pane and drag it in to the right pane or click the right
arrow.
Figure 3.35: Filtering for LUNs and LBAs

4. Select the command, double‐click or right‐click, and select Match Fields. The
following filter dialog displays (see Figure 3.34 on page 175 ).
5. Enter the values in the field.
6. Click OK twice.