Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 - Manual (Page 37)

SierraNet M408 User Manual 35
InFusion Teledyne LeCroy
1.7.3 Preferences
For special work, you can use the Preferences menu to configure Software Settings, Port
Alias, Address Alias and Display Settings. (See
“Preferences” on page 182 .)
1.7.4 Port Status
You can display an overview of the active ports by clicking the buttons at the bottom right
of the main window (see
“Ports Status” on page 170 ).
1.8 InFusion
The Teledyne LeCroy InFusion™ Error Injector and Traffic Modifier is an error injector and
traffic modification tool that allows you to verify real‐world fault handling for SierraFC
systems (see
“InFusion” on page 195 ).
1.9 CrossSync Control Panel
The CrossSync Control Panel allows you to select analyzers for synchronization and
manage the recording process. It supports a wide combination of Teledyne LeCroy’s
flagship analyzers including PCI Express, USB, DDR, Serial ATA (SATA), Serial Attached SCSI
(SAS), Fibre Channel (FC) and Ethernet.
CrossSync is Teledyne LeCroy’s analyzer synchronization solution that enables time‐
aligned display of protocol traffic from multiple daisy‐chained analyzers showing packet
traffic from multiple high‐speed serial busses. A lightweight software control panel allows
users to select analyzers for synchronization and manage the recording process. Captured
traffic is displayed using the latest analyzer software (in separate windows) with all the
protocol specific search and reporting features.
Captured packets are displayed in separate windows that share a common time scale.
Navigating the traffic in either direction will scroll to the same timestamp in a
synchronized window. When using the CrossSync option, users can access the full
complement of analysis capabilities available within the individual Teledyne LeCroy
software. Search, reporting, and decoding all operate normally.
This feature is available with the Teledyne LeCroy Net Protocol Suite software application.
1.9.1 Launching the CrossSync Control Panel
Click Start > Programs > LeCroy > CrossSync > CrossSync Control Panel to launch the
application.