Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 - Manual (Page 26)

Teledyne LeCroy Launching Your Analyzer
24 SierraNet M408 User Manual
Figure 1.14: Device Management Dialog
Set Alias Name
Address Alias allows you to assign a meaningful name to each address to assist in
interpreting the results displayed in the trace view. To assign address names in an open
trace view, select Setup > All Connected Devices > Set Device Alias Name (see
Figure 1.15 on page 24 .)
Figure 1.15: Assign Alias Name
Assign a meaningful name to each address in use and click OK. The assigned names
replace the address in the trace view, Search, filter,. and Statistical Report.
If you elect to save the captured trace file, the assigned address names are saved
together with the result, so that when you open the trace file later, the assigned names
are retained.
Set As Default
If you want to set these address aliases for trace files that will be captured later, you can
set them as default, and new traces will be opened by these default address aliases.
Connect/Disconnect
Click Connect to connect or click Disconnect to disconnect a device.