Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 - Manual (Page 231)

SierraNet M408 Protocol Analyzer User Manual 229
Scenario Example Teledyne LeCroy
Figure 4.19: Adding an Event for Sequence 1
2. Click OK to close the 6‐Byte Any SCSI Command dialog box.
3. After adding an Event, to add an Action in the Sequence 1 panel, drag and drop
Monitor/Count.
The Monitor/Count dialog box displays.
Figure 4.20: Adding Action Monitor/Count for Sequence 1
4. Click the OK button to close the Monitor/Count dialog box.
5. Repeat step 4 to add another Action (if desired).
The completed Scenario is shown below.