Teledyne LeCroy Sierra M122 User Manual - Manual (Page 104)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
102 Sierra M122 SAS/SATA Protocol Analyzer User Manual
The dialog shows the current port configuration. To select a port configuration, click the
down arrow to display the Select Port Configuration dialog.
Figure 2.72: SAS: Select Port Configuration Dialog
Port configuration depends on the application you run. Use the checkboxes at the top to
filter the list of port configurations by the required function.
Note: To display the current Port Configuration, click the green button in the lower right corner to
display the Port Status window (see “Port Status” on page 188 ).