Teledyne LeCroy Sierra M122 User Manual - Manual (Page 169)

Sierra M122 SAS/SATA Protocol Analyzer User Manual 167
Navigation + View Toolbar Teledyne LeCroy
ATA Command
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured ATA commands in the Trace Viewer.
Protocol Error
When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured packets with the specified Protocol Errors in the Trace Viewer.
ATAPI SCSI Command
When selected, depending on the Filter Type, the Show/Hide selection shows or hides
ATAPI SCSI commands.
Filter Check Condition
Checking the SCSI Command Status check box enables Check Condition for filtering (see
Figure 3.86 on page 167 ).
Figure 3.86: SAS: Filter Check Condition