Teledyne LeCroy Sierra M122 User Manual - Manual (Page 138)

Teledyne LeCroy Analysis
136 Sierra M122 SAS/SATA Protocol Analyzer User Manual
Read/Write Command Report (SAS)
To display the Read/Write Command Report, click the Read/Write Command tab. You
can enable or disable creation of this page by selecting Create statistical report read/
write page in the Trace Viewer tab (see
“Trace Viewer Tab” on page 205 ). The Read/Write
Command report displays the report data in columns with the following information:
 Source SAS Address
 Destination SAS Address
 Protocol Type
 OpCode/Command
 Tag
 LBA
 Sector Count
 Xfer Length
 Payload Size: All, Custom, or a number of DWORDs
 Status: All, Custom, Good
 Completion Time
 Performance
 Standard Deviation
 Count: All, Custom, or a number
Figure 3.41: SAS: Read Write Command Report