Teledyne LeCroy Sierra M122 User Manual - Manual (Page 81)

Sierra M122 SAS/SATA Protocol Analyzer User Manual 79
SAS/SATA Software Menus and Toolbars Teledyne LeCroy
Note: You can define triggering for specific ports by checking or unchecking Port IDs.
Symbol
Double‐click Symbol in the Patterns window of the Capture Project dialog to open the
Symbol dialog.
Figure 2.43: SAS: Symbol Dialog
Choose a symbol type by checking either the K Symbol or D Symbol option, then click the
down arrow in the Symbol dropdown list, choose a symbol to trigger on, and click OK.
Note that the D Symbol choice does not have a down arrow.
To choose a D symbol, click the D symbol option button and enter a Hex value.
Primitive
Double‐click Primitive in the Patterns window of the Trigger dialog to open the Primitive
dialog.
Figure 2.44: SAS: Primitive Dialog
SAS vs. SATA: SATA Dialog has no radio buttons and has different drop‐down options.