Teledyne LeCroy Sierra M122 User Manual - Manual (Page 349)

Sierra M122 SAS/SATA Protocol Analyzer User Manual 347
Sierra Trainer Generation Language Teledyne LeCroy
5.11.8 Generation Options
Use the Generation Rules to set triggers and filters.
AUTO_WAIT_SATA_AFTER Settings
AUTO_WAIT_SATA_AFTER_
X_RDY_FOR_R_RDY
FALSE When set, the generator will insert WAIT_FOR
SATA_R_RDY command immediately after each case
of SATA_CONT primitive following SATA_X_RDY
primitive.
AUTO_WAIT_SATA_AFTER_
WTRM_FOR_STATUS FALSE When set, the generator will insert WAIT_FOR
SATA_R_ERR or SATA_R_OK command immediately
after each case of SATA_CONT primitive following
SATA_WTRM primitive.
AUTO_WAIT_SATA_AFTER_
PMREQ_S_FOR_RESPONSE FALSE When set, the generator will insert WAIT_FOR
SATA_PMACK or SATA_PMNAK command
immediately after each case of SATA_CONT primitive
following SATA_PMREQ_S primitive.
AUTO_WAIT_SATA_AFTER_
PMREQ_P_FOR_RESPONSE FALSE When set, the generator will insert WAIT_FOR
SATA_PMACK or SATA_PMNAK command
immediately after each case of SATA_CONT primitive
following SATA_PMREQ_P primitive.
AUTO_WAIT_SATA_AFTER_
SYNC_FOR_SYNC FALSE When set, the generator will insert WAIT_FOR
SATA_SYNC command immediately after each case of
SATA_CONT primitive following SATA_SYNC primitive.
AUTO_WAIT_SATA_BEFORE Settings
AUTO_WAIT_SATA_BEFORE
_PMACK_FOR_PMREQ
FALSE When set, the generator will insert WAIT_FOR
SATA_PMREQ_S or SATA_PMREQ_P command right
before each SATA_PMACK primitive.
AUTO_WAIT_SATA_BEFORE
_PMNAK_FOR_PMREQ FALSE When set, the generator will insert WAIT_FOR
SATA_PMREQ_S or SATA_PMREQ_P command right
before each SATA_PMNAK primitive.
AUTO_WAIT_SATA_BEFORE
_RERR_FOR_WTRM FALSE When set, the generator will insert WAIT_FOR
SATA_R_ERR command right before each
SATA_WTRM primitive.
AUTO_WAIT_SATA_BEFORE
_ROK_FOR_WTRM FALSE When set, the generator will insert WAIT_FOR
SATA_R_OK command right before each SATA_WTRM
primitive.
AUTO_WAIT_SATA_BEFORE
_RIP_FOR_SOF FALSE When set, the generator will insert WAIT_FOR
SATA_R_IP command right before each SATA_SOF
primitive.
AUTO_WAIT_SATA_BEFORE
_R_RDY_FOR_X_RDY FALSE When set, the generator will insert WAIT_FOR
SATA_X_RDY command right before each
SATA_R_RDY primitive.
Setting
Default
Value
Description