Teledyne LeCroy QPHY-DDR4 - Manual (Page 14)

Creating Custom Configurations
Beginning with any of the pre-loaded configurations,
1. Click on the Test Selector tab to change what tests you would like to be included in your new
configuration.
2. Click on the Variable Setup tab to change the variables for your new configuration.
3. Click on the Limits tab to change which limit set should be used for your new configuration
• See QualiPHY Manual for more information
4. Once a change has been made to any of these sections, the Save As button becomes clickable
on the bottom of the dialog.
5. Clicking the Save As button will prompt you for a new configuration name and description.
Note: If a Custom Configuration was used for the procedure, the Save button will also become
clickable on the bottom of the dialog. Clicking this button will update the current configuration
with new changes.
6. Once a custom configuration is defined, script variables and the test limits can be changed by
using the Variable Setup and Limits Manager from the Edit/View Configuration window.
14 924291 Rev A