Figure 68 – dut name warning – Teledyne LeCroy QPHY-DDR4 User Manual
Page 73
Advertising
QPHY-DDR4 Software Option
DUT Name
When running in Demo mode QPHY will prompt a warning if the DUT name is not “Demo”. The DUT
name entered should match the name of the folder containing the saved waveforms.
Figure 68 – DUT Name Warning
Solution
Ensure that the DUT name matches the folder which you have the saved waveforms in. If it does press
“OK”.
Thank you for reading the QPHY-DDR4 Operator’s Manual. If you have any further questions please
contact your local Teledyne LeCroy representative for assistance.
924291 Rev A
73
Advertising