ZOLL R Series Monitor Defibrillator Rev K Operators Guide - Manual (Page 113)

Transferring a Full Disclosure File to a Compact Flash Card
9650-0912-01 Rev. K ZOLL R Series Operator’s Guide 11–3
To remove a compact flash card:
Press the release button and pull the card out of the slot.
Figure 11-2. Removing a Compact Flash Card
Transferring a Full Disclosure File to a Compact Flash
Card
Make sure that a compact flash card is installed in the slot on the left side of the device.
To transfer data to a compact flash card:
1. Turn the Mode Selector to MONITOR.
2. Press the Report Data softkey.
3. Press the Transfer Mode softkey.
4. Press the Report to Card softkey.
The message TRANSFERRING DATA is displayed. All data is transferred to the installed CF
data card.
Note: Do not remove the CF card while files are transferring. Corruption may result on the
data card.
When all files are transferred, the message DATA TRANSFERRED is displayed. You can now
remove the CF card from the R Series unit.
To exit Data Transfer mode, press the Exit Transfer softkey.
Transferring Device Check and Activity Log Files to a
Compact Flash Card
Make sure that a compact flash card is installed in the slot on the left side of the device.
To copy the Code Readiness Log to a CF card:
1. Turn the mode selector to MONITOR.