IEI Integration IMBA-9454 v4.02 - Manual (Page 110)

IMBA-9454G Motherboard
Page 92
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding IMBA-9454G external peripheral interface connector making
sure the pins are properly aligned.
5.7.1 PS/2 Keyboard/Mouse Connection
The IMBA-9454G has a dual PS/2 connector on the external peripheral interface panel.
The dual PS/2 connector is used to connect to a keyboard and mouse to the system.
Follow the steps below to connect a keyboard and mouse to the IMBA-9454G.
Step 1: Locate the dual PS/2 connector. The location of the dual PS/2 connector is
shown in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse
connector into the appropriate PS/2 connector on the external peripheral
interface connector. See Figure 5-17. Step 0:
Figure 5-17: PS/2 Keyboard/Mouse Connector