IEI Integration IMBA-9454 v4.02 - Manual (Page 98)

IMBA-9454G Motherboard
Page 80
5.3.2 LGA775 Cooling Kit Installation
WARNING:
It is strongly recommended that the original heat sink and cooler
provided by Intel not be used on the IMBA-9454G.
IEI’s cooling kits include a support bracket that is combined with the
heat sink mounted on the CPU to counterweigh and balance the load
on both sides of the PCB.
CF-520-RS CF-775A-RS
Figure 5-5: IEI Cooling Kits
The IEI LGA775 CPU cooling kits shown in Figure 5-5 can be purchased separately. The
cooling kits comprise of a CPU heat sink and a cooling fan.
WARNING:
Do not wipe off (accidentally or otherwise) the pre-sprayed layer of
thermal paste on the bottom of the heat sink. The thermal paste
between the CPU and the heat sink is important for optimum heat
dissipation.
Follow the instructions below to install a cooling kit.