IEI Integration IMBA-9454 v4.02 - Manual (Page 124)

IMBA-9454G Motherboard
Page 106
 Manufacturer: Lists the name of the CPU manufacturer
 Frequency: Lists the CPU processing speed
 FSB Speed: Lists the FSB speed
 Cache L1: Lists the CPU L1 cache size
 Cache L2: Lists the CPU L2 cache size
 Ratio Actual Value: Displays the ratio at which the CPU is actually operating
6.3.2 IDE Configuration
Use the IDE Configuration menu (BIOS Menu 4) to change and/or set the configuration
of the IDE devices installed in the system.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
IDE Configuration

ATA/IDE Configuration [Enhanced]
Configure SATA as [IDE]
Configure SATA Channels [Before PATA]
> Primary IDE Master
: [Not Detected]
> Primary IDE Slave : [Not Detected]
> Secondary IDE Master : [Not Detected]
> Secondary IDE Slave : [Not Detected]
> Third IDE Master : [Not Detected]
> Third IDE Slave : [Not Detected]
Options:
Disabled
Compatible
Enhanced
 Select
Screen
  Select
Item
+ - Change Option
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 4: IDE Configuration
 ATA/IDE Configurations [Enhanced]
Use the ATA/IDE Configurations option to configure the ATA/IDE controller.

Disabled Disables the on-board ATA/IDE controller.

Compatible Configures the on-board ATA/IDE controller to be in
compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode supports up
to 4 storage devices.

Enhanced D EFAULT Configures the on-board ATA/IDE controller to be in