IEI Integration WAFER-945GSE v2.01 - Manual (Page 32)

WAFER-945GSE 3.5" Motherboard
Page 17
The ATX power supply enable connector enables the WAFER-945GSE to be connected
to an ATX power supply. In default mode, the WAFER-945GSE can only use an AT power
supply. To enable an ATX power supply, the AT Power Select jumper must also be
configured. Please refer to Chapter 4 for more details.
Figure 3-3: ATX Power Supply Enable Connector Location
Pin Description
1 +5V Standby
2 GND
3 PS-ON
Table 3-4: ATX Power Supply Enable Connector Pinouts
3.2.3 Audio Connector (10-pin)
CN Label: AUDIO1
CN Type: 10-pin header
CN Location: See Figure 3-4
CN Pinouts: See Table 3-5
The 10-pin audio connector is connected to external audio devices including speakers and
microphones for the input and output of audio signals to and from the system.