8 heat sink enclosure, Nclosure, Figure 4-21: vga connector – IEI Integration WAFER-945GSE v2.01 User Manual

Page 78

Advertising
background image

WAFER-945GSE 3.5" Motherboard

Page 63

Figure 4-21: VGA Connector

Step 4:

Secure the connector. Secure the DB-15 VGA connector from the VGA

monitor to the external interface by tightening the two retention screws on either

side of the connector.

4.8 Heat Sink Enclosure

WARNING:

Never run the WAFER-945GSE without the heat sink secured to the

board. The heat sink ensures the system remains cool and does not

need addition heat sinks to cool the system.

Advertising
See also other documents in the category IEI Integration Hardware: