IEI Integration WAFER-945GSE v2.01 - Manual (Page 57)

WAFER-945GSE 3.5" Motherboard
Page 42
Step 5: Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket.
4.3.2 CF Card Installation
To install the CF card (Type 1 or Type 2) onto the WAFER-945GSE, please follow the
steps below:
Step 1: Locate the CF card socket. Place the WAFER-945GSE on an anti-static pad.
Locate the CF card.
Step 2: Align the CF card. Make sure the CF card is properly aligned with the CF
socket.
Step 3: Insert the CF card. Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 4-2.
Figure 4-2: CF Card Installation