7 usb cable (dual port without bracket) (optional), Figure 4-16: audio kit cable connection – IEI Integration WAFER-945GSE v2.01 User Manual
Page 73
WAFER-945GSE 3.5" Motherboard
Page 58
Step 1:
Locate the audio connector. The location of the 10-pin audio connector is
shown in Chapter 3.
Step 2:
Align pin 1. Align pin 1 on the on-board connector with pin 1 on the audio kit
connector. Pin 1 on the audio kit connector is indicated with a white dot. See
Figure 4-16: Audio Kit Cable Connection
Step 3:
Connect the audio devices. Connect one speaker to the line-in audio jack, one
speaker to the line-out audio jack and a microphone to the mic-in audio jack.
4.6.7 USB Cable (Dual Port without Bracket) (Optional)
The WAFER-945GSE is shipped with a dual port USB 2.0 cable. To connect the USB
cable connector, please follow the steps below.
Step 1:
Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.