IEI Integration WAFER-945GSE v2.01 - Manual (Page 38)

WAFER-945GSE 3.5" Motherboard
Page 23
The keyboard and mouse connector can be connected to a standard PS/2 cable or PS/2
Y-cable to add keyboard and mouse functionality to the system.
Figure 3-9: Keyboard/Mouse Connector Location
Pin Description
1 +5 V KB DATA
2 MS DATA
3 MS CLK
4 KB DATA
5 KB CLK
6 GROUND
Table 3-10: Keyboard/Mouse Connector Pinouts
3.2.9 LED Connector
CN Label: LED_C1
CN Type: 6-pin wafer
CN Location: See Figure 3-10
CN Pinouts: See Table 3-11
The LED connector connects to an HDD indicator LED and a power LED on the system
chassis to inform the user about HDD activity and the power on/off status of the system.