IEI Integration PPC-5xxx-9455 v1.00 - Manual (Page 133)

PPC-5xxx-9455 Panel PC
Page 115
Boot Display Device
Use the Boot Display Device option to select the display device used by the system
when it boots. Configuration options are listed below.
Auto
CRT - Default
TV
LFP
CRT + LFP
Flat Panel Type [By Jumper]
Use the Flat Panel Type is set using the onboard jumper settings. The jumper settings
can be found in the Installation and Configuration chapter.
PID Current Jumper Setting [1-1024x768x24]
The PID Current Jumper Setting shows the current setting of the flat panel resolution
jumper.
Internal Graphics Mode Select [Enable, 8 MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory
that can be used by the Internal graphics device.
Disable
Enable, 1 MB 1 MB of memory used by internal graphics device
Enable, 8 MB D EFAULT 8 MB of memory used by internal graphics device
Disabled Scaling is disabled