IEI Integration PPC-5xxx-9455 v1.00 - Manual (Page 52)

PPC-5xxx-9455 Panel PC
Page 34
3.1 Anti-static Precautions
WARNING!
Failure to take ESD precautions during the installation of the
PPC-5xxx-9455 may result in permanent damage to the
PPC-5xxx-9455 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the PPC-5xxx-9455. Dry climates are especially susceptible to ESD. It is critical
that the following anti-static precautions are strictly adhered to whenever handling the
PPC-5xxx-9455 or any other electrical component.
Wear an anti-static wristband - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the PPC-5xxx-9455.
Self-grounding - Touch a grounded conducting material before handling and
periodically while handling the PPC-5xxx-9455.
Use an anti-static pad - When configuring the PPC-5xxx-9455, place it on an
antic-static pad to reduce the possibility of ESD damage.
Only handle the edges of the PPC-5xxx-9455 - When handling the
PPC-5xxx-9455, hold it by its edges.
3.2 Unpacking Precautions
When the PPC-5xxx-9455 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 3.1.
Make sure the packing box is facing upwards so the PPC-5xxx-9455 does not
fall out of the box.
Make sure all the components shown in Section 3.3 are present.