Figure 4-2: hdd retention screws, Figure 4-3: hdd sata connector, Form ( figure 4-2 ) – IEI Integration PPC-5xxx-9455 v1.00 User Manual
Page 66
Advertising
PPC-5xxx-9455 Panel PC
Page 48
Figure 4-2: HDD Retention Screws
Step 3:
Attach the SATA connector cable to the bracket.
Figure 4-3: HDD SATA Connector
Step 4:
Attach the hard drive in the bracket. To do this, slide the hard drive onto the
bracket until it connects with the SATA connector at the back. Fasten the four
retention screws on the side.
Advertising