IEI Integration PPC-5xxx-9455 v1.00 - Manual (Page 57)

PPC-5xxx-9455 Panel PC
Page 39
4.3 Installation and Configuration Steps
The following installation steps must be followed.
Step 1: Unpack the PPC-5xxx-9455.
Step 2: Set the jumper settings.
Step 3: Install HDD, CompactFlash® and CD drive.
Step 4: Mount the PPC-5xxx-9455 flat panel PC.
Step 5: Connect peripheral devices to the bottom panel of the PPC-5xxx-9455.
Step 6: Configure the system. Step 0: