Figure 4-16: mount the chassis – IEI Integration PPC-5xxx-9455 v1.00 User Manual
Page 75
Advertising
![background image](/manuals/356362/75/background.png)
PPC-5xxx-9455 Panel PC
Page 57
Figure 4-16: Mount the Chassis
Step 9:
Secure the panel PC with the wall-mounting kit. To do this, stick the protective
cushion to the wall-mounting kit first. Then, put the wall-mounting kit on the top
panel of the panel PC. Carefully mark the location of the wall-mounting kit screw
holes on the wall. Drill a pilot hole at the marked location on the wall. Secure the
wall-mounting kit to the wall by inserting a retention screw into the pilot hole on
the wall (Figure 4-17). This step is to avoid the panel PC being pushed apart
from the wall-mounting bracket accidentally.
Step 0:
Advertising