SaltDogg SHPE6000 Series Electric Drive Poly Hopper Spreader - Manual (Page 8)

8
TM
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • saltdogg.com
3021675 Rev. A
SHPE6000 Assembly
SHPE6000 SALTDOGG ® SPREADER
WARRANTY INFORMATION
This warranty replaces all previous warranties and no employee of this
company is authorized to extend additional warranties, or agreements,
or implications not explicitly covered herein.
Buyers Products Company warrants all parts of the product to be free
from defects in material and workmanship for a period of one (1) year.
Parts must be properly installed and used under normal conditions.
Normal wear is excluded.
Any part, which has been altered, including modifications, misuse,
accident, or lack of maintenance will not be considered under this
warranty.
The sole responsibility of Buyers Products Company under this warranty
is limited to repairing or replacing any part(s), which are returned,
prepaid, 30 days after such defect is discovered, and returned part(s) are
found to be defective by Buyers Products Company.
Authorization from Buyers Products Company must be obtained before
returning any part. The following information must accompany defective
parts returned to Buyers Products Company: RMA #, spreader model,
serial number, date installed, and distributor from whom purchased.
Buyers Products Company shall not be liable for damage arising out
of failure of any unit to operate properly, or failure, or delay in work, or
for any consequential damages. No charges for transportation or labor
performed on any part will be allowed under this warranty.
Bill of Materials
ITEM NO. PART NO. QTY. DESCRIPTION
1 3018639 1 Hopper Assembly, SHPE6000
2 3019256 1 Chute Assembly, SHPE6000
3 3021674 1 Hardware Kit, SHPE6000
4 3016934 1 Controller, Speed, 12 VDC, 60 AMP
5 3016943 1 Power Cord
6 3016944 1 Wire Harness Main
7 0203700 1 Wire Assembly, 36" Long
8 3001238 2 Pin, Clevis 3/8 x 3/4 w/ 1/8 Hole
9 3001257 2 Pin, Hair Cotter SS
1
2
4
5
6
7
8
9
3